The GUN Forum

Find answers, ask questions, and connect with our
community around the world.

home Forums – The GUN Forum Ammunition Reloading 1st Stab at 9mm Subsonic

  • 1st Stab at 9mm Subsonic

     james updated 1 year ago 2 Members · 6 Posts
  • james

    Member
    May 16, 2021 at 10:07 pm

    1st Stab at 9mm Subsonic

  • Reden-Orvillebacher

    Guest
    May 16, 2021 at 10:08 pm

    147gr Berry’s Plated RN over 3.5-3.6gr of Titegroup, CCI#500 primers and mixed brass. Confidence is high as I see this recipe in a few places on the webs, but still only loaded 50 to try out first. Never know till you know, you know? Gonna feed it to my Scorpion pistol with SiCo Osprey 45 and a FN 509c with SiCo Omega 9K.

  • samiam0295

    Guest
    May 16, 2021 at 10:08 pm

    I’m running ≈3.25 of TG over 147gr FMJ pulls at 1.150″, for reference. Burns pretty clean

  • Parking_Media

    Guest
    May 16, 2021 at 10:08 pm

    H4198 would definitely make them subsonic. 🙂

  • UnknownRiderTunes

    Guest
    May 16, 2021 at 10:08 pm

    Did something similar and happy with the results. 147 grain Speer FMJ, 4.0 grains of 800X. Chrono’s at 900 FPS from my Sig MPX (13.5” barrel) with no flash and little to no recoil. Wont cycle reliably out of shorter barreled pistols though…..

  • BlueZee28

    Guest
    May 16, 2021 at 10:08 pm

    Nice, im using those projectiles with Power Pistol. My best SD/ES was using 4.7 grains.

Viewing 1 - 6 of 6 replies
Reply to: james
Your information:

Cancel
Start of Discussion
0 of 0 posts June 2018
Now