The GUN Forum

Find answers, ask questions, and connect with our
community around the world.

home Forums – The GUN Forum Firearms Rifles BP Firearms Plague

  • BP Firearms Plague

     Maverick updated 11 months, 1 week ago 2 Members · 2 Posts
  • Maverick

    Member
    June 14, 2021 at 11:42 am

    I bought a nomad 30 and keymo about 2 years ago and they were manufactured by BP firearms. I have been having issues with the threads seizing when trying to remove the keymo from the nomad.

    Currently I cannot get the keymo off with the dead air spanner wrenches and a vox block, so I ordered a spanner tool that will hopefully help break it free.

    Anyone having similar issues? Is there a way to determine if it is the suppressor, the keymo, or both?

  • Yamz427

    Guest
    June 14, 2021 at 11:42 am

    All those cans/adapters are 17-4 Poon Handler stainless.

    Which is susceptible to galling. Are you using some sort of anti seize on the threads when you crank it down? You should be.

    It’s more than likely galled itself on.

    Try lightly heating it up with a torch to break it free.

    Edit: GAULING to GALLING

Viewing 1 - 2 of 2 replies
Reply to: Maverick
Your information:

Cancel
Start of Discussion
0 of 0 posts June 2018
Now