The GUN Forum

Find answers, ask questions, and connect with our
community around the world.

home Forums – The GUN Forum Ammunition Reloading FAQ and Starter Guide

  • RaZaRacOdVas

    Guest
    April 1, 2021 at 8:01 pm

    Lol first step, find primers.

  • haberdasher42

    Guest
    April 1, 2021 at 8:01 pm

    Hey Thanks! I’m looking to start reloading this winter and just found this to start diving into the subject.

  • marcuccione

    Guest
    April 1, 2021 at 8:01 pm

    First thing I checked is if my two favorite posts are still there.

    My favorite is can I use this dented brass

    And can reduced power loads blow up my gun.

  • Eustis1

    Guest
    April 1, 2021 at 8:01 pm

    Did not know this existed. Now I can cry with more of the same folk over NO RELOADING SUPPLYS!

  • SaferInTheBasement

    Guest
    April 1, 2021 at 8:01 pm

    I had no idea what this was called until just now, my grandpop had me doing this when I was a kid. We used to pop primers on the basement floor for fun now I’m seeing they are friggin gold lol.

  • 8ballrun

    Guest
    April 1, 2021 at 8:01 pm

    Is there a website where the average guy can trade components? Like lets say i have a bunch of 45 slugs that i dont need and im looking for small pistol primers, kind of like brass swap before the commies took over?

  • Decent-Lengthiness-8

    Guest
    April 1, 2021 at 8:01 pm

    Hi all. If i buy pre primed new brass. Is there anything i should be careful of? Thank you

  • [deleted]

    Guest
    April 1, 2021 at 8:01 pm

    I knocked over my powder measure on my loading bench. Me not being the wasteful type I neatly gathered it back up on a sheet of paper and put it back into the measure. I was promptly rewarded with several squib loads on my next outing to the range. I decided to let all the powder gravity flow through the measure and discovered a single hair is capable of wreaking havoc on the flow of powder through the measure.

  • izeeto

    Guest
    April 1, 2021 at 8:01 pm

    I did just get the Dillon 750xl 9mm starter kit, but my biggest question right now is. What’s the difference between a 9mm 115 grain case and a 9mm 124grain case

    and A

    9mm 115 bullet head and a 9mm 125 bullet head,

    I have a few cases but there all mixed and different grains, does it matter? is that information in the reloading book??

    how do I know what’s what??

  • Sawyer8383

    Guest
    April 1, 2021 at 8:01 pm

    What is a good price for a bucket of used wheel weights from my local tire shop the guy offered 35 for a 3/4 full bucket

  • mighty_micheal70

    Guest
    April 1, 2021 at 8:01 pm

    I heard that it can be dangerous how often is there an accident

  • TheGaujo

    Guest
    April 1, 2021 at 8:01 pm

    Formatting jacked up on brave

  • mbtobot

    Guest
    April 1, 2021 at 8:01 pm

    You’re a good brother!

Reply to: james
Cancel
Your information:

Start of Discussion
0 of 0 replies June 2018
Now