The GUN Forum

Find answers, ask questions, and connect with our
community around the world.

home Forums – The GUN Forum Fishing Ice Fishing Is this vent as easy to replace as it seems with a standard RV vent?

  • Is this vent as easy to replace as it seems with a standard RV vent?

    Posted by nick on November 9, 2021 at 7:48 pm

    Is this vent as easy to replace as it seems with a standard RV vent?

    nick replied 9 months, 1 week ago 2 Members · 5 Replies
  • 5 Replies
  • cycleguychopperguy

    Guest
    November 9, 2021 at 7:48 pm

    Looks a lot like a regular rv vent to me

  • Wouldtick

    Guest
    November 9, 2021 at 7:48 pm

    Yes make sure the measurements are correct and caulk the outside seams

  • icemac33

    Guest
    November 9, 2021 at 7:48 pm

    Yes. Most likely just a 14″ standard vent.

  • A3FtCentipede

    Guest
    November 9, 2021 at 7:48 pm

    can verify it’s a camper vent. seal the bottom side of the vent with butyl tape. seal the outside with an appropriate sealant. silicone can sick to metal or fiberglass but it has a tendency to peal up. I’d recommend dicor or alphathane. (these are available at a rv dealership) clean the area throughly and I personally use a cheap hair paint brush to even out the sealant. spend the money and fix this correctly or it will cost you more later. if you have a 12v line running though the area I also recommend installing a vent with a fan for drying/ ventilation purposes.

  • Green_Damage_8453

    Guest
    November 9, 2021 at 7:48 pm

    Just rebuild it ffs. Come on. Where are your standards?

Reply to: nick
Cancel
Your information:

Start of Discussion
0 of 0 replies June 2018
Now