The GUN Forum

Find answers, ask questions, and connect with our
community around the world.

home Forums – The GUN Forum Ammunition Reloading SRP for striker fire 9mm?

  • SRP for striker fire 9mm?

     james updated 11 months, 2 weeks ago 2 Members · 6 Posts
  • james

    Member
    June 13, 2021 at 5:53 am

    Hi all,

    I used to use small rifle primers (cci 400) for .38spl and it worked great.

    I have a p365 coming in this week and I don’t have any small pistol primers, but have a few thousand srp.

    Anyone using srp for loading for a p365?

    Just checking to see if the striker will have enough force to ignite them.

  • N0obkiller1995

    Guest
    June 13, 2021 at 5:53 am

    I’ve done it with federal srp and had no issue in a p365.

  • Florida-Steve

    Guest
    June 13, 2021 at 5:53 am

    I use SRP for 9mm loads with success in my glock and canik pistols. Every once in a while “1 out of a hundred” I get one that doesn’t ignite, eject and carry on. Try the same round a second time and it ignites fine. These particular primers were 20 years old stored in a mil spec ammo can.

  • hungryfatcats

    Guest
    June 13, 2021 at 5:53 am

    Start a load a minimum charge weight and then work up. SRP has a stronger cup meant for rifle bolt and firing pins, but striker fire handguns can ignite said harder primer cup fairly well.

  • ATrashPandaRound2

    Guest
    June 13, 2021 at 5:53 am

    I’ve been using cci srp for my 365xl

  • Kryakozavr

    Guest
    June 13, 2021 at 5:53 am

    Have p365, 1-2 per hundred not ignite by first strike, but work after second strike. Same story on p365XL.
    Absolutely different story – HK VP9.
    No any misfire. Thousand and thousand ammo.
    CCI small rifle primers.

Viewing 1 - 6 of 6 replies
Reply to: james
Your information:

Cancel
Start of Discussion
0 of 0 posts June 2018
Now